Information about hot water temperatures in taps, lowering the water temperature while balancing legionella risks and complying with Building Regulations requirements.
This information was confirmed as current in February 2016. It originally appeared in Codewords newsletters prior to January 2014.
Children and elderly people are at most risk
Children often receive serious scalds because they have more sensitive skin than adults and burn more quickly.
Elderly people can be vulnerable due to disabilities or slow reaction times.
- a child is left in a bath with the hot tap running, while the parent or caregiver is distracted by the telephone
- a child turns on the hot tap, falls into the bath, and can’t get out
- an elderly person falls and injures themselves when showering, accidentally adjusting the water to the hottest setting and unable to get out of the hot shower water.
Lowering the hot water temperature
Hot water in residential housing is required, when using Acceptable Solution G12/AS1, to be no hotter than 55oC when it comes out of the tap.
This is because it only takes five seconds for 60oC water to burn human skin. But it’s much slower at 53oC, when it takes a full minute to cause first degree burns.
One common practice to reduce the chance of scalding is installing a tempering valve on the hot water pipe from the storage water heater. This mixes enough cold water with the hot water to keep it at a temperature which reduces the risk of scalding.
Balancing the scalding risk and the Legionella risk
Water that’s too hot creates the risk of scalding. But water that’s not hot enough creates the risk of harmful Legionella bacteria growing in storage water heaters.
The solution to this problem is to store hot water at a minimum temperature of 60oC, and deliver it to baths, showers, basins and bidets at a temperature no greater than 55oC. Installing a tempering valve is one way of achieving this.
How to comply with Building Regulations requirements
You can comply with the Building Regulations clause G12 Water Supplies by using either of the following:
- Acceptable Solution G12/AS1 - see section 6.14
- Verification Method G12/VM1 that references the Standard AS/NZS 3500.4 Heated water services. You can buy AS/NZS 3500.4 from the
Length of exposure and water temperature at which full thickness skin scalds can occur.